Image vendors
Tamanho da fonte: + -

CAMEA


Visão geral

CAMEA is Czech company with more than 20 years of experience in image processing (algorithms, illumination units, camera design), signal processing (algorithms, sensors, signal conditioning), real-time processing, embedded computing and HW/SW development for various traffic and industry applications, CAMEA is creating state-of-the-art and field-proven platforms for industrial and multifunctional intelligent transportation solutions with hundreds of applications around the world.

Produtos

The UnicamWIM system is a state-of-the art solution for a variety of high and low speed Weigh-In-Motion (HS/LS-WIM) applications as defined by international standards (e.g. COST323, ASTM E1318). It measures and records weights of wheels, axles and vehicles (gross) passing over weighing sensors embedded in the road pavement. All measurements are done at normal traffic speeds, so complete vehicle weighing (wheels, axles, gross) can be performed without any traffic flow disturbances. The system has been certified for direct WIM enforcement (type approval certificate valid in the Czech Republic).


Aplicação

The system is designed for true multi-lane bi-directional free flow measurement and verifies the accuracy of all measured parameters of the vehicles in both road directions and also when driving between road lanes. The accuracy of weighing may be lowered by nonstandard vehicle behavior (acceleration, deceleration, lane traversing, shoulder driving etc.) or other influences (bad vehicle or road conditions, uneven weight distribution etc.). So to determine whether the measured values are in the defined accurate class, the system provides advanced measurement validity evaluation. The system can be combined with other ITS systems such as spot/section speed enforcement systems, dimension in-motion (using a 3D scanner), vehicle search etc. Highly accurate traffic classification and data collection is available. Estimation of road ruts and sensor surface wear can be calculated from the collected data, so load equivalence factor evaluation can be provided (ESAL, AASHTO).


Referência

CAMEA has realized several WIM projects in the Czech Republic, Poland, Slovak Republic, Switzerland, Brazil, Mexico, Kenya, Ivory Coast and many sites in the Russian Federation.
 
CAMEA

Endereço

Korenského 25
62100 Brno, Czech Republic

Contato

Otto FUCIK

Tel

+420 541 228 874

E-mail

l.brnkova@camea.cz

Web

www.camea.cz
Skip to toolbar